The WV-CS854A is the new version of the now discontinued WV-CS854. It is a self-contained unit that incorporates an integral color camera, pan-and-tilt motor, zoom lens and receiver/driver. The camera has a diameter of 4-1/2". The camera features an advanced 1/4" CCD with a built-in complimentary color filter and 768(H) x 494(V) pixels with microlens on each pixel. The camera is equipped with digital signal processing (DSP) to produce a high quality picture with a horizontal resolution of over 480 lines with a minimum illumination of 0.8 lux (f/1.6) in color mode; 0.06 lux (f/1.6) in black & white mode. The camera features an infrared cut filter capable of being removed automatically upon low light threshold or manually. The WVCS854 camera's Super Dynamic II CCD is charged with long and short charges, creating both standard shutter speeds and fast shutter speeds simultaneously, on a single image field. The Super Dynamic CCD shall automatically apply each exposure pattern to bright and normal areas. The Super Dynamic camera shall feature a 28MHz 10-bit digital signal processor for image processing of both long and short signals, for a wide dynamic range of up to 64 times. The camera shall be equipped with an auto back light compensation and shall feature mask setting and level adjust capability. The camera shall be equipped with a built-in digital motion detector with mask setting and level adjustment as well. The camera shall also be equipped with an electronic sensitivity up feature to enhance camera performance in extreme low light conditions. The camera shall feature auto tracing white balance capability with a 48 section mask and level adjustment capability for accurate color reproduction. The unitized surveillance device shall feature an electronic shutter adjustable from 1/100 to 1/10,000 second. The camera shall feature an alphanumeric title of 16 characters. The camera unit includes 8 privacy zones that mask areas dynamically; the zones shall change size automatically with camera lens focal length and camera pan/tilt position. The privacy zone features a supervisor override function. The camera features titling for each of 8 areas, user-definable 16 character titles or preprogrammed camera position readout (North, NorthEast, East, SouthEast, South, SouthWest, West, NorthWest). The Camera�s zoom lens shall have a �� format and a focal length of 3.79-83.4mm (22.01X magnification). The zoom lens shall have an auto iris and auto focus feature that shall allow manual override if the need arises. The zoom lens shall provide continuous digital zoom (10X) for a total maximum magnification of 220.1X. The minimum aperture throughout this range shall vary from a minimum of f/1.6 at the wide angle setting to f/3.0 at the telephoto lens position. The pan-and-tilt motor shall be a high-speed unit allowing 360� rotation with a tilt angle of 180�. The camera shall feature a direct drive motor assembly. Belt driven unitized camera units shall not be acceptable. The camera shall be equipped with a slip ring assembly having an optical interface and be rated for continuous operation. The Camera unit shall support digital flip technology for instant view of objects passing under the camera. The camera unit shall support continuous tilt movement through a 180� tilt range. Units with mechanical pivoting or rotation of imager assembly through the tilt range shall not be acceptable. The pan-and-tilt shall allow for preset sort and sequence rotation speed of 300� per second. The unitized surveillance device shall feature a minimum of 64 preset positions. The camera features a built-in digital motion detector with a 48 section mask and level adjustment capability. The camera automatically sequences through the preset positions in logical programming order (sequence mode) or actual position (sort mode). The camera shall include 10 programmable scene files, each having a combination of special camera settings such as built-in digital motion detector and electronic sensitivity up. The camera shall be capable of scanning each preset position for motion at the preset position�s scene, and delivering an alarm condition over a single coaxial cable or via RS-485 communications. The camera shall feature four (4) alarm inputs that may activate either of two (2) included, programmable outputs, activate a preset position or send an alarm signal to the Panasonic model WJ-FS616/WV-PB6164 multiplexer with control kit, Matrix System 500, Matrix System 850 and single camera controllers, model WV-CU151/WV-CU161. These alarm signals may be send via multiplexed signal (over a single coaxial cable) or via the include RS-485 control communications interface. Any scene file shall be able to be assigned to a camera-preset position for optimum camera performance in difficult lighting conditions. The pan-and-tilt section shall feature automatic panning mode. The automatic panning limits and speed adjustment shall be selectable from an on-screen menu and not with mechanical or physical limit stops. The camera unit shall include a patrol feature in which a user-recorded pattern of pan, tilt and zoom settings may be replayed repeatedly. The dome assembly shall come pre-wired from the factory. The video, camera control and synchronization signal shall be transmitted up to 3000' over coaxial cable when used with the Panasonic model WJ-FS616/WV-PB6164 multiplexer with control kit, Matrix System 500, Matrix System 850, single camera controller, model WV-CU151 or WV-CU161 and multiple camera controller Model WJ-MP204 when used with Model WV-CU350 or WV-CU360 controllers. The camera shall support multiplexed control communications (over a single coaxial cable) or camera control and data access via RS-485 communications. The camera is enclosed in an aluminum diecast housing that is holds the IP52 drip proof environmental structure rating, and be UL listed. The power source is 24VAC, 60Hz at 18W.
